Indicating plug gage Marameter 844 DS-HR
| Product number: | 4484616 |
|---|
844 DS-HR Indicating plug gage
Nominal size: >160-170
Measuring span : 0.2
Connection thread g: M10x1
Design: Für Sacklochbohrungen, für Tol. < 10 µm
Material Contact surface: carbide
Nominal size: >160-170
Measuring span : 0.2
Connection thread g: M10x1
Design: Für Sacklochbohrungen, für Tol. < 10 µm
Material Contact surface: carbide
Product price
1.670,00 €
Application
Model for blind holes, for very tight tolerance fields less than 10 µm
Manufacturing tolerance of the guide cylinder reduced to 0.01 mm (±5 µm) to reduce the axial and radial measuring influences
Manufacturing tolerance of the guide cylinder reduced to 0.01 mm (±5 µm) to reduce the axial and radial measuring influences
- For measurements close to the base of the hole
- For the rapid testing of diameter, roundness and conicity of bores
- Ideal for testing batches with very tight tolerance fields less than 10 µm
- Rocking in the bore is not required to determine diameter
- Therefore ideal for use in conjunction with digital display units and for subsequent processing of measured values
Product features
- Measuring head has a hard, stainless cylinder guide and carbide-tipped anvils
- The carbide expanding pin transfers radial movement to indicating instrument
- Constant measuring force as a result of built-in spring, eliminating user influence
- Extensive modular system is composed of measuring head, holder, depth extension, right angle attachments and depth stops
Material Contact surface
carbide
Marameter 844 DS-HR | Art. no. 4484616
Dimensions
a 17.9 mm | b 38.6 mm | c 40 mm | e 1.2 mm |